污水生化处理耗氧量计算与应用

根据各类型好氧工艺运行的特点,结合多年设计经验,给出详细计算公式和参数选择范围,说明每个参数含义。     

Inhibitory effect of nitrobenzene on oxygen demand in lake sediments

Nitrobenzene is an important raw material and product,which presents a heavy threat to the ecosystem.The potential impacts of nitrobenzene on sediment oxygen demand (SOD) were studied in lake sediment ...     

城市污泥中重金属有效态分布特征研究

以沈阳市北部污水处理厂剩余活性污泥为研究对象,对污泥中重金属Cd,Pb,Cu,Zn的含量及其形态分布特性进行分析。结果表明:污泥中4种重金属的含量基本符合国家相关控制标准(GB 18918-2002和CJ248-2007)。采用8种提取剂(0.05 mol/L EDTA,0.01 mol/L CaCl2,0.01 mol/LCa2(NO3)2,0.1 mol/L NaNO3,1 mol/L NH4OAC,0.43 mol/LHAC,0.05mol/L NaHCO3和0.05 mol/L Tris-HCl)分别对污泥中重金属的螯合态,中性交换态,酸溶态,碱溶态和蛋白质结合态进行分离分析。结果表明:4种重金属螯合态存在的比例较大,分别占各重金属总量的5.9%~27.2%,其次为酸溶态和中性交换态,而以碱溶态和蛋白质结合态形式存在的比例较少,除Cd外均低于1%。污泥中Cd和Pb具有较高的活性,而Cu,Zn在碱性污泥中主要以稳定态存在。     

SBR亚硝化快速启动过程中影响因子研究

在低DO条件下对SBR反应器实现快速亚硝化的途径及影响因素进行研究.控制反应器主要参数为：DO 0.15～0.40mg/L,pH值7.52～8.30,温度22.3～27.1℃,曝气时间为8 h.通过高、低氨氮浓度（245.28 mg/L与58.08 mg/L）交替进水的方式,经过57个周期（36 d）的稳定运行成功实现...     

染料废水处理技术现状与发展

介绍了染料废水的物理、化学和生物处理技术,分析了其去除原理和工艺优缺点,提出了未来染料废水处理技术的发展走向——高效、经济、适应性强、清洁性的废水处理技术。     

浅析黑龙江省松花江入境水质指标的变化规律

在黑龙江省松花江入境断面(肇源断面)内选择监测点,对不同月份的水体中化学需氧量、总磷、氨氮和粪大肠菌群数量的动态监测。结果表明,不同时期河流中的化学需氧量、总磷、氨氮和粪大肠菌群数量变化趋势不同,在夏季时化学需氧量和总磷的浓度较高,而氨氮的浓度在1月份较高,粪大肠菌群数量在8月份最大。     

PAN dust explosion inhibition mechanisms of NaHCO3 and Al(OH)3

We investigate the PAN dust explosion inhibition behaviors of NaHCO₃ and Al(OH)₃ in a 20 L spherical explosion system and a transparent pipe explosion propagation test system. The results show that, in the standard 20 L spherical explosion system, the highest PAN dust explosion concentration is 500 g/m³, the maximum explosion pressure is 0.661 MPa, and the maximum explosion pressure increase rate is 31.64 MPa/s; adding 50% NaHCO₃ and 60% Al(OH)₃ can totally inhibit PAN dust explosion. In the DN0.15 m transparent pipe explosion propagation test system, for 500 g/m³ PAN dust, the initial explosion flame velocity is 102 m/s, the initial pressure is 0.46 MPa, and the initial temperature is 967 °C; adding 60% NaHCO₃ and 70% Al(OH)₃ can totally inhibit PAN dust explosion flames. Through FTIR and TG analyses, we obtain the explosion products and pyrolysis patterns of the explosion products of PAN dust, NaHCO₃, and Al(OH)₃. On this basis, we also summarize the PAN dust explosion inhibition mechanisms of NaHCO₃ and Al(OH)₃.     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

温拌阻燃沥青混合料阻燃效果评价

通过氧指数、质量损失率及路用性能试验,研究EC130温拌剂、FRMAX型阻燃剂对沥青混合料阻燃效果的影响。试验结果显示,相比普通沥青混合料,阻燃沥青混合料、温拌阻燃沥青混合料氧指数分别增加23.3%、25.6%,质量损失率减小28.0%、32.0%,残留动稳定度增加14.0%、16.1%,残留最大弯拉应变增加14.1%、17.1%,冻融劈裂强度比增加5.3%、9.0%。相比普通沥青路面,阻燃沥青路面、温拌阻燃沥青路面发生火灾时能够减少34.0%、41.1%的毒害气体生成,并减少路面修补所需的混合料质量。其次得出普通沥青路面、阻燃沥青路面及温拌阻燃沥青路面的质量损失率、残留动稳定度、残留最大弯拉应变、残留冻融劈裂强度比与燃烧时间的关系模型。结果表明:阻燃剂对沥青混合料的阻燃效果显著;温拌剂有助于阻燃剂更好地发挥阻燃作用,降低火灾对道路的破坏,降低隧道火灾发生时有害气体的生成,提升隧道安全性。     

火电湿法烟气脱硫塔模拟及优化操作分析

基于火电石灰石-石膏湿法烟气脱硫工艺,以华能福州电厂实际生产数据为依据,经对设备分别简化建模,建立了反映实际脱硫过程的脱硫塔模型,形成全工艺模拟流程,模型计算结果和实际运行数据间平均误差为0.4364%.对脱硫工艺过程进行灵敏度分析,得出循环浆液pH值、烟气流量、液气比等因素对吸收效率的影响.最后,以灵敏度分析结论为基础,借助多目标优化方法分析不同工况下各控制因素对脱硫效率的影响,得到基本优化控制范围(pH值处于5.4～5.6、烟气压力处于0～1000Pa)和相应的最优控制方案,并分析了优化操作结果的工业适用性.